Network Registers - ADEUNIS ARF8230CA Guide Utilisateur

LoRaWAN 863-870 PULSE - Guide utilisateur / User guide version V3.0.0
S330 2 Number of daily periods
under the leak threshold
(channel A)
S331 2 Number of daily periods
under the leak threshold
(channel B)
S332 1 Scan period for Channel
A tamper input
S333 1 Tamper detection
threshold channel A
S334 1 Scan period for Channel
B tamper input
S335 1 Tamper detection
threshold channel B
S340 1 Number of redundant
samples per frame
3.4.2

Network registers

The list of registers below allows you to modify the network parameters of the product. This list is ac-
cessible in Provider mode following execution of the ATT63 Provider command.
These registers must be handled with caution because they could cause problems of communication or
of non-compliance with the legislation in force.
Regis- Size Description
ter (bytes)
S201 4 Spreading
Factor (SF) by
default
S202 4 Band width
S205 4 Transmission
power
S206 4 Spreading
Factor (SF)
maximum
S207 4 ADR settings:
ADR_ACK_
LIMIT
Decimal Default value: 0 (deactivated)
Min/max : 0 to 1440
Unit : none
The multiplication of this register by the period
of flow measurement must be less than 24 hours
otherwise the product will be perpetually in alarm.
Decimal Default value: 0 (deactivated)
Min/max : 0 to 1440
Unit : none
The multiplication of this register by the period
of flow measurement must be less than 24 hours
otherwise the product will be perpetually in alarm.
Decimal Default: 2
Min/Max: 1 to 255
Unit: x10 seconds
Decimal Default: 3
Min/Max: 1 to 255
Unit: none
Number of positive scans of A-channel tamper
before triggering the tamper alarm
Decimal Default: 2
Min/Max: 1 to 255
Unit: x10 seconds
Decimal Default: 3
Min/Max: 1 to 255
Unit: none
Number of positive scans of B-channel tamper
before triggering the tamper alarm
Decimal Default : 0
Min/Max: 0-255
Coding
Decimal Default: 12 (868) or 10 (915) depending on the reference of the
product
Min/max: 4 to 12
Unit: None
Decimal Default: 0
Possibilities:
• 0=125kHz
• 1=250kHz
• 2=500kHz
Decimal Default: 14
Min/max : 2 to 14
Unit : dBm
Decimal Default: 12 (868) or 10 (915) depending on the reference of the
product
Min/max: 5 to 12
Unit: None
Decimal Default : 64
Min/max : 1 to 64
Unit: none
Details
Page
FR
EN
79 of 103