Length (m)
MODEL
(L1 + L2)
0 ÷ 4
4 ÷ 10
1.24 F - 24 F
10 ÷ 20
20 ÷ 30
If the discharge duct is longer than 6 metres, install the condensate collection kit, supplied as an accessory, near the boiler.
building walls. For detailed installation instructions, consult the technical data provided with the accessories.
10.2.1 NOTES FOR INSTALLATIONS WITH SEPARATE OUTLETS
A
A
11. ELECTRICAL CONNECTIONS
Use a double-pole switch with a contact separation of at least 3 mm.
Access to the power supply terminal block
•
•
•
•
The terminal block is at high voltage. Before making connections, make sure the appliance is disconnected from the power
supply.
L
(L)
Live
(N)
Neutral
Earth
(1) (2)
Room Thermostat
7221796.02 (1-10/15)
Using a DIAPHRAGM on
OUTLET DUCT (mm) "A"
Ø 43
Ø 45
Ø 47
N
Length (m)
MODEL
(L1 + L2)
0 ÷ 15
18 F
15 ÷ 25
1.14 F - 14 F
25 ÷ 30
2
10
Using a DIAPHRAGM on
OUTLET DUCT (mm) "A"
Ø 41
Ø 43
Ø 45
A