Initial Operation - Soehnle FIT CONNECT 100 Mode D'emploi

Waste disposal of electric and electronic
equipment, EC Directive 2002/96/EC
EN
This product is not to be treated as normal
household waste, but must be taken to a
collection point for the recycling of electric
and electronic equipment. You can get further information
from your local authority, the local waste disposal compa-
nies or the shop where you bought the product.
Soehnle hereby declares that this device
complies with the basic requirements and
the other relevant provisions of Directive
2014/53/EU. You can find the EU Declaration of
Conformity at www.soehnle.com.

3. Initial operation

Charging the battery
Charge the fitness tracker completely before using it for
the first time. To do so, undo the display module (A) from
the wrist strap (B) by pushing the wrist strap inwards
on the right hand side (3.1) until the display module is
released. Pull the display module out of the wrist strap
(3.2). Plug the USB connector for the display module
(D) into a standard, active USB port. Make sure that the
contacts on the module (3.3) are touching the contacts
on the USB port, otherwise the device will not charge.
The battery's charging status is shown on the display
(4.1) ( = completely charged / = battery empty).