Initial Operation - Soehnle Fit Connect 300 HR Mode D'emploi

Waste disposal of electric and electronic
equipment, EC Directive 2002/96/EC
This product is not to be treated as normal
household waste, but must be taken to a
collection point for the recycling of electric
and electronic equipment. You can get further information
from your local authority, the local waste disposal compa-
nies or the shop where you bought the product.
Soehnle hereby declares that this device
complies with the basic requirements and
the other relevant provisions of Directive
2014/53/EU. You can find the EU Declaration of
Conformity at www.soehnle.com.

3. Initial operation

Charging the battery
Charge the tracker completely before using it for the first
time. Take the removable wrist strap (B) off the display
module (A) (3.1). Now plug the USB connector for the
display module (C) into a standard, active USB port. Make
sure that the contacts on the module (3.2) are touching
the contacts on the USB port, otherwise the device will
not charge.
The battery's charging status is shown on the display
(4.1.1) ( = completely charged /
EN
= battery empty).