Technical Data; Operation Of The Unit; Care And Maintenance; Spare Parts - DENTAURUM Polyclav Mode D'emploi

5. Technical Data

Voltage
Power
Dimensions

6. Operation of the Unit

The heating plate is connected to the power supply via a grounded plug.
„ „
Important: The power supply voltage must correspond to the voltage
stated on the plate of the unit.
The unit is switched on using the power supply switch.
„ „
During the heating phase, the red light glows.
„ „
Switch the unit off after use.
„ „
Important: Never use the unit without the Polyclav

7. Care and Maintenance

The heating plate requires very little care or maintenance. Use a damp cloth to clean
the unit.
Note: Never use abrasive or corrosive cleaning agents to clean the unit.

8. Spare Parts

Description
Rocker switch
Control module
Temperature sensor
230 V
115 V
125 W
240 x 240 x 75 mm / 9 1/2" x 9 1/2" x 3"
Unit, 230 V Unit, 115 V
070-900-00 070-901-00
REF REF
907-143-10 907-143-10
978-120-10 978-120-20 (circuit board inside unit)
907-070-10 907-070-10
50/60 Hz REF 070-900-00
50/60 Hz REF 070-901-00
pressure vessel.
®
EN
7