Troubleshooting; Disposal; Service - Parkside HG01829 Instructions D'utilisation Et Consignes De Sécurité

Clean the pressure sprayer before
storing it away.
R emove any leftover spray product from
the container
5
S tore the pressure sprayer in a dry, dust-
free place away from frost.

Troubleshooting

If the measures listed below are not successful,
contact the manufacturer.
= Fault
= Potential causes
= Remedies
No pressure is established
in the container.
The pump is not firmly screwed into place.
Screw the pump firmly into place.
The sealing ring of the pump
been greased.
Loosen the pump cover
. Check the sealing ring or gasket of
2
the pump , grease the sealing ring of
2
the pump.
Spray nozzle does not spray.
No pressure present.
Generate pressure using the pump.
The spray nozzle is blocked.
Clean the spray nozzle.
No spray in the container
Fill with spray.
The spray head is set between 2 spray
functions.
Set the spray head right.
and the tube.
has not
2
from the pump
2 a
.
5

Disposal

The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Contact your local refuse disposal authority
for more details of how to dispose of your
worn-out product.

Service

Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1800 200736
E-Mail: owim@lidl.ie
GB/IE 19