Publicité
EN
ENGLISH
In
connection
with
powers, which are very diff er-
ent from bulb versions, there can
be problems with the bulb failure
check during operation on vari-
ous traction vehicles. Since indica-
tor failure checks are required by
legislation, we recommend only
operating the light in combination
with an indicator control unit part
no. "5DS 009 602-..., 5DS 009 552-
... or LED fl asher unit 4.. 009 492".
37
CARE INSTRUCTIONS
Outer lens
•
Rinse under running water.
•
Use a little detergent if necessary
(not a scouring agent!).
•
Clean with a so cloth or sponge
and then dry.
•
Do not use a microfi bre cloth or
scouring pad!
In addition, further lighting func-
tions are detected by some traction
these
low
vehicles. This is a vehicle comfort
function which is not required by
legislation and does not release
drivers from their obligation to see
for themselves that the lighting
equipment is working. Here, too,
faulty diagnoses can be a result
of the lower power levels involved
(instrument panel in the driver cab
indicates a bulb failure although the
function is working).
The functional ability of these light
Refl ector
•
Do not touch the silver-coloured
area with your fi ngers (hold the
refl ector at the side)!
•
Do not do any cleaning inside the
bulb sockets!
Hella recommendation:
Use a natural sponge!
failure checks can only be estab-
lished by the vehicle manufacturer.
If the control unit in the vehicle
can restrict the current to match
the above requirement, additional
fuse protection is not required for
the lamp. Operation of the light
with alternating current or pulsed
direct current is not permitted!
The functional ability of these light
failure checks can only be estab-
lished by the vehicle manufacturer.
Publicité
