What If There Are Problems; Technical Data - Beurer WL 32 Mode D'emploi

• Always replace all batteries at the same time and use bat-
teries of the same type. Do not use rechargeable batter-
ies.
• Leaking batteries may damage the device. If you do not
intend to use the device for longer periods, remove the
batteries from the battery compartment.
• Leaking or damaged batteries may burn the skin therefore
use suitable protective gloves if this is the case.
8. Disposal
Dispose of the unit in accordance with EC
Directive 2002/96/EC – WEEE (Waste Electri-
cal and Electronic Equipment). If you have any
questions, please contact the local authorities
responsible for waste disposal.
The empty, completely flat batteries should be dis-
posed of through specially designated collection
boxes, recycling points or electronics retailers. You
are legally required to dispose of the batteries.
Note: The codes below are printed on batteries containing
harmful substances: Pb = Battery contains lead, Cd = Bat-
tery contains cadmium, Hg = Battery contains mercury.

9. What if there are problems?

If the time is not displayed correctly or the device does not
function correctly, the cause may be attributed to electro-
static discharge or other faults. Therefore, do not position
the device near to other devices, such as WLAN etc. To
remedy the problem, reset the device to the factory settings.
To reset the device to the factory settings, press in the
reset button on the underside of the device using a poin-
ted object.
If the problem persists, contact Customer Services.

10. Technical data

Wake-up light function
Snooze duration
Goodnight function
Dimensions
Weight
Mains part
Voltage supply
Mains part
Protection class
Radio frequency range:
Illuminance:
20
OFF, 15, 30 minutes before
alarm
5 to 60 minutes
Choose between 5, 10, 15,
30, 45, 60, 75, 90 minutes
and OFF.
12.3 x 12 cm
180 g
Input: 100-240 V, AC / 50/60
Hz
Output: 5.5 V, DC/500 mA
Protection class II
87 – 108 MHz VHF
Approx. 15 Lux (at distance
of 15 cm)