Cleaning And Maintenance; What If There Are Problems; Disposal; Technical Specifications - Beurer WL 75 Mode D'emploi

2. Press the or button until "
play. Confirm with the Set button. Bluetooth
deactivated on the wake up light.

8. Cleaning and maintenance

• Clean the device with a dry cloth.
• Do not use any abrasive cleaning products.
• Ensure that no water enters the device. If this should
happen, only reuse the device once it has fully dried out.
• Never immerse the device or mains part plug in water
or other liquids.
• Protect the device from impacts, moisture, dust, chem-
icals, marked temperature fluctuations and nearby
sources of heat (ovens, heaters).

9. What if there are problems?

Problem Possible
cause
Device On/off button
does not switched off
light up
No electricity
No electricity
LEDs have
reached the
end of their
service life.
LEDs faulty.
No Device outside
Bluetooth the range.
®
connection
( symbol
is missing).
No connection
to the app.
You can find further information and a list of fre-
quently asked questions (FAQs) about this product at
www.beurer.com.
" appears on the dis-
is now
®
Solution
Switch on the on/off
button.
Connect the mains part
properly.
The mains part is faulty.
Contact customer ser-
vices or your retailer.
If you need to have the
device repaired, contact
customer service or an
authorised dealer.
The minimum range
in the open is approx.
10 m. Other radio waves
may interfere with the
transmission.
Completely close the
app (including in the
background). Switch
Bluetooth off and
®
back on again. If need
be, remove it from
the devices list in the
Bluetooth settings, and
®
then use the "beurer
LightUp" app. Switch
the smartphone off and
back on again.

10. Disposal

For environmental reasons, do not dispose of the device
in the household waste at the end of its useful life. Dis-
pose of the device at a suitable local collection or
recycling point. Observe the local regulations for
material disposal. Dispose of the device in ac-
cordance with EC Directive – WEEE (Waste Elec-
trical and Electronic Equipment). If you have any ques-
tions, please contact the local authorities responsible for
waste disposal.

11. Technical specifications

Illuminance
Light
Light levels
Mood light
Snooze time
LCD backlighting
Time
Alarm
Charging function
Button tone
AUX
Radio
Loudspeaker
Mains part
Manufacturer:
Model no.:
Supply
Input:
Output:
Average active
efficiency
No-load power
consumption
Mains part
protection class
15
Max. approx. 2,000 lux (at
distance of 15 cm)
LED technology (LED service life:
> 20,000 hours)
10 on wake up light
Infinitely variable via app
Automatic RGB colour change,
option of setting individual colour
1–30 minutes
Off, 1, 2, 3
Can be switched between
12h/24h
2 alarm times
Wake up: alarm tone, radio,
6 wake-up melodies
Fall asleep: 4 sleep melodies
Smartphones can be charged
via USB
Off, On
Line-in, 3.5 mm jack plug
Frequency range FM 87.5 –
108 MHz, 10 memory spaces
2 watts
Kuantech Incorporated Company
KSASB0240900200HE
100-240V AC 50/60Hz 0.6A
9V DC 2A 18W
≥ 85%
≤ 0,1W
Protection class II