Features And Technical Specifications; Package Contents - MELICONI AT55 White Mode D'emploi

Masquer les pouces Voir aussi pour AT55 White:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
B
If the picture quality is unsatisfactory, or no signal is received, proceed as follows:
• Rotate the antenna receiver until reception improves.
• Regulate the gain by adjusting the antenna amplifi cation; the maximum gain level does not
always correspond to the best picture quality.
• If possible, we recommend retuning the device (TV/DECODER) channels by connecting it
temporarily to an alternative, valid signal source (communal antenna).
It is important to remember that the use of an indoor antenna should be considered an
"alternative" solution; thus, the quality of the results obtained using an indoor antenna may
vary, depending on the conditions in which it is used, and hence the signal strength.

FEATURES AND TECHNICAL SPECIFICATIONS

• Amplifi ed indoor antenna
• 230 Vac - 50 Hz mains power input via an adapter included (supplied).
• Reception of digital terrestrial TV signals (DVB-T) and DAB and DAB+ radio signals.
• Reception range: VHF (band III - 174~230 MHz) and UHF (470~790 MHz).
• 4G LTE + GSM noise fi lters
• Signal gain adjustment: up to 55 dB.
• Power consumption: < 2 W
• Output impedance: 75 Ohm
2 YEAR WARRANTY - The warranty shall be declared null and void if the product is tampered
with or used improperly. Retain the purchase receipt to validate the warranty.

PACKAGE CONTENTS

- Antenna
- Instruction booklet
- AC/DC power supply unit
The Manufacturer, Meliconi SpA, hereby declares that the "AT 55 amplifi ed antenna" radio type
device conforms to the requirements of the Directive 2014/53/EU (RED).
The complete text of the EU Declaration of Conformity is available at the following Internet
address: www.meliconi.com/doc/at55
The symbol showing a wheelie bin with a cross through it which appears on the device indicates that at the end of its useful life the
product must be collected separately from other waste. Therefore, at the end of the device's working life, you must take it to appropriate
centres for the differentiated collection of electrical and electronic waste, or return it to the retailer when purchasing a new device of
equivalent type. Suitable differentiated collection to allow subsequent recycling of the decommissioned device, with environmentally-
compatible treatment and disposal, help to prevent any negative effects on the environment and health and to promote the recycling of
the materials of which the device is made.
6
Improving reception
Simplifi ed EU Declaration of Conformity

Publicité

Table des Matières
loading

Table des Matières