Description Of Symbols - Silverline 245014 Mode D'emploi

GB

Description of Symbols

The rating plate on your tool may show symbols. These represent
important information about the product or instructions on its use
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
DO NOT use with compressed gas cylinders!
Conforms to relevant legislation and safety standards
Environmental Protection
Air tools should not be disposed of with household
waste. They contain traces of oil and other lubricants.
Please recycle where facilities exist. Check with your
local authority or retailer for recycling advice.
Specification
Fluid type: ...................................................Compressed air
Maximum operating pressure: ....................10bar (145psi)
Adjustable outlet pressure range: ...............0.5 - 8.5bar (7-123psi)
Operating temperature range: .....................5 - 50°C
Air connections: ..........................................G ¼"
Condenser bowl capacity: ...........................150ml
Oil bowl capacity: .......................................250ml
Condenser/oiler bowl material: ...................Polycarbonate
Recommended Lubricant: ...........................ISO VG 32 air tool oil
Weight: .......................................................1kg
4
General Safety Warnings
• For multiple hazards, read and understand the safety
instructions before installing, operating, repairing, maintaining,
changing accessories on, or working near this device. Failure
to do so can result in serious bodily injury
• Only qualified and trained operators should install, adjust, or
use this device
• Do not modify this device. Modifications can reduce the
effectiveness of safety measures and increase the risks to the
operator
• Do not discard the safety instructions; give them to the
operator
• Do not use this device if it has been damaged
• Tools shall be inspected periodically to verify that the ratings
and markings required by this part of ISO 11148 are legibly
marked on the tool. The employer/user should contact the
manufacturer to obtain replacement marking labels when
necessary
WARNING: This appliance is not intended for use by persons
(including children) with reduced, physical or mental capabilities
or lack of experience or knowledge unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children must be supervised
to ensure that they do not play with the appliance.
Projectile Hazards
• Be aware that failure of this device can generate high-velocity
projectiles
• Always wear impact-resistant eye protection during operation
of this device. The grade of protection required should be
assessed for each use
• The risks to others should also be assessed at this time
• Ensure that the device is securely fixed
Workplace Hazards
• Slips, trips and falls are major causes of workplace injury. Be
aware of slippery surfaces caused by use of the tool and also
of trip hazards caused by the air line or hydraulic hose
• This tool is not intended for use in potentially explosive
atmospheres and is not insulated against contact with electric
power