Hapro Luxura V10 Série Mode D'emploi page 19

The parameter "1" will appear at the top of the display, and the name of the parameter "START TIME" will scroll across
the bottom.
Use the <3> and <4> keys to navigate to parameter "4". (Press <4> 3x.)
The parameter "4" will appear at the top of the display, and the name of the parameter "RESET LAMP HOUR
COUNTER" will scroll across the bottom.
Press <2> 1x.
The number "4" will appear at the top of the display and "OFF" will appear at the bottom.
Press <4> 1x to change "OFF" to "ON".
Press <2> to reset the hour counter.
The number "4" will appear at the top of the display and the message "LAMPS HOUR COUNTER RESET" will scroll 1x
across the bottom. After this de message "RESET LAMP HOUR COUNTER" will scroll across the bottom.
Press <5> 2x to exit the configuration mode.
The message "LUXURA, IT'S YOUR BODY" will appear on the display.
Check
Press the <3> and <12> keys at the same time for 3 seconds to read the lamp hour counter.
The code "HL" will appear at the top of the display and the number "0" will scroll at the bottom.
+ +
3 sec.
19