Displaying Temperature Trends; Battery State Display; Replacing The Batteries; Troubleshooting - OWIM HG00073A Instructions D'utilisation Et Consignes De Sécurité

Displaying temperature
trends
After successfully connecting with the outdoor
sensor, the temperature station can display
the temperature trend (outdoor)
temperature trend (indoor)
You may see the following displays:
= The temperature is rising.
= The temperature is constant.
= The temperature is falling.

Battery state display

The
3
temperature station's LC display if the batteries
in the outdoor sensor or the temperature station
are weak.

Replacing the batteries

Open the battery compartment
Remove the exhausted batteries.
Insert two new 1.5 V
into the battery compartments.
Note: Make sure you fit the batteries the
right way round (polarity). This is shown in
the battery compartments (see Figs. B + D).
Close the battery compartments.

Troubleshooting

Note: This appliance has delicate electronic
components. This means that if it is placed near
and
7
1
.
5
symbols appear in the
batteries (AA)
and the
or .
24 30
GB/IE 21