Technical Data Sheet; Cvs 4 Micro (En54) Technical Specifications - Tannoy CVS 4 Micro Mode D'emploi

9. CVS 4 Micro (EN54) Technical Specifications

Technical Data Sheet

9. CVS 4 Micro (EN54) Technical Specifications
Specifi cations
Performance
System
Frequency response (-3 dB)
Frequency range (-10 dB)
Rated sensitivity (1 W, Lo Z)
Sensitivity as per EN54
(4 m, through transformer)
Directivity factor (Q)
Directivity Index (DI)
Power Handling
(3)
Average
Programme
Peak
Recommended Amplifi er Power
Nominal Impedance (Lo, Z)
Maximum SPL as per EN54
Rated maximum SPL (1 m, Lo Z)
Average
Peak
Transformer Taps (via front rotary switch)
70 V
100 V
Crossover Point
Coverage angles (4)
500 Hz
1 kHz
2 kHz
4 kHz
Distortion
10% full power
1% full power
Transducers
Low Frequency
High Frequency
Physical
Enclosure
Back can
Baffl e
Grille
Safety Features
Clamping Design
Connectors
Dimensions
Bezel diameter
Front of ceiling to rear of back can
Front of ceiling to cable entry centre
Hole cutout diameter
Net Weight (ea)
Included Accessories
Optional Accessories
Packed Quantity
12
CVS 4 Micro (EN54) Operation Manual rev 1.1.1
CVS 4 Micro (EN54)
110 Hz - 19 kHz
(1)
90 Hz - 22 kHz
(1)
(2) 87 dB
74.1 dB
(2)
5.6 averaged 1 kHz to 6 kHz
7.1 averaged 1 kHz to 6 kHz
40 W
80 W
160 W
80 W @ 6 ohms
6 ohms
85.1 dB
(4 m, through transformer)
(2)
(2)
103 dB
109 dB
15 W (330 Ω) / 7.5 W (660 Ω) / 3.75 W (1320 Ω) / 1.9 W (2600 Ω) /
OFF & low impedance operation
15 W (660 Ω) / 7.5 W (1320 Ω) / 3.75 W (2600 Ω) /
OFF & low impedance operation
2.5 kHz
Horizontal plane
250 Hz
1 kHz
10 kHz
250 Hz
1 kHz
10 kHz
150 mm (6.00") mineral loaded cone material
19 mm (0.75") coaxially mounted
Blind Mount (BM)
Painted steel
Refl ex loaded UL 94V-0 rated ABS
Steel, with weather resistant coating
Safety ring located at rear of enclosure for load bearing safety bond
Security toggle clamp
Euroblock-type connector with screw terminals
(with input cover and cable gland supplied)
213.0 mm (8.39")
98.3 mm (3.87")
46.5 mm (1.83")
180 mm (7.09")
2.0 kg (4.4 lbs)
C-Ring, tile-bridge kit, paint mask, cut-out template
Plaster (mud) ring
2
CVS 4 Micro (EN54)
Vertical plane
179° 178°
168° 167°
155° 149
86° 76
Harmonics
2nd 3rd
0.231% 0.112%
0.229% 0.253%
0.163% 0.025%
0.99% 0.169%
0.816% 0.027%
0.444% 0.07%
Ordering Information
Part Number
8001 7610
8001 4180
Plaster (Mud) Ring
(CVS 4)
Notes:
1. Average over stated bandwidth. Measured in
an IEC baffl e in an Anechoic Chamber
2. Unweighted pink noise input, measured at
1 metre on axis
3. Long term power handling capacity as defi ned
in EIA - 426B test
4. The reference point for the reference axis
(on-axis) is the centre of the baffl e. The
horizontal and vertical planes are defi ned with
the speaker mounted with the transformer
tapping selector at the bottom
A full range of measurements, performance data,
CLF and Ease™ Data for CVS 4 Micro can be
downloaded from www.tannoy.com. They also apply
to the CVS 4 Micro (EN54).
°
Tannoy operates a policy of continuous research
°
and development. The introduction of new materials
or manufacturing methods will always equal or
exceed the publishing specifi cations, which Tannoy
reserves the right to alter without prior notice. Please
verify the latest specifi cations when dealing with
critical applications.
Copyright (c) 2013 Tannoy Limited. All rights reserved.
tannoy.com/pro
Colour
White /
Paintable
Zinc Plated
Steel
EN54
certified
V 1.00 - 18/09/13