Manuels Connexes pour Tannoy CVS Série
Sommaire des Matières pour Tannoy CVS Série
- Page 1 Quick Start Guide CVS Series CVS 8/CVS 6/CVS 4 8/6/4" Coaxial In-Ceiling Loudspeaker for Installation Applications CVS 4 MICRO 4" Coaxial In-Ceiling Loudspeaker with Shallow Back Can for Installation Applications...
- Page 2 11. Use únicamente los dispositivos o accesorios Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, por un técnico cualificado. manufacturer, or sold with cualquier persona por confiar total o parcialmente en...
-
Page 3: Wichtige Sicherheitshinweise
Ce symbol signale les consignes et des surfaces de oder eingetragene Warenzeichen der Music Tribe Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, Im Innern des Geräts befinden sich keine vom Benutzer oder im Lieferumfang d’utilisation et d’ e ntre ! Tien importantes travail recommandés... -
Page 4: Safety Notices
14. Utilize apenas com ceiling material or clamps. Recommended torque setting: 1.5 Nm. TANNOY will not be held responsible for any damages caused by the improper installation of these marcas são propriedade de seus respectivos donos. -
Page 5: Product Feature Identifi Cation
CVS Series Quick Start Guide Product Feature Identifi cation Accessories Standard Accessories CVS 8 CVS 8 Hole Cutout Size: 320 mm CVS 6 Hole Cutout Size: 250 mm Safety Tab CVS 4 / CVS 4 MICRO Hole Cutout Size: 180 mm Rotary Switch C-Ring Tile bridge kit... - Page 6 C-ring to the tile bridge using the fi xings provided. Tighten the screws until a fi rm grip is achieved. If using a power driver, TANNOY recommends a torque setting of 1.5 Nm. DO NOT OVERTIGHTEN! 4. Slide the speaker assembly through the hole and turn the screws on the front of the speaker to extend the mounting wings.
-
Page 7: Wiring And Setting Up
Installation Instructions for Optional Plaster Ring Wiring and Setting Up An optional plaster (mud) ring bracket is available from TANNOY. This bracket is designed to be pre-installed into newly constructed, non-suspended ceilings. 1. Nail or screw the plaster ring to the joists. - Page 8 CVS Series Quick Start Guide CVS 6 Dimensions CVS 8 Dimensions CVS 6 Hole Cutout Size: 250 mm CVS 8 Hole Cutout Size: 320 mm 264.0 251.0 [10.39"] [9.88"] 246.5 258.5 [9.70"] [10.18"] 19.6 [0.77"] 15.9 [0.63"] 355.6 315.2 [14.00"] [12.41"] ø279.6 ø244.6...
- Page 9 CVS Series Quick Start Guide CVS 4 Dimensions CVS 4 MICRO Dimensions CVS 4 Hole Cutout Size: 180 mm CVS 4 MICRO Template Cutout Size: 180 mm 98.3 202.5 214.9 [3.87"] [7.97"] [8.46"] 14.7 [0.58"] 14.7 [0.58"] ø213.0 ø175.0 [8.39"] [6.89"] ø213.0 ø174.8...
-
Page 10: Technical Specifications
CVS Series Quick Start Guide Painting Technical Specifi cations If desired, the grille and baffl e panel may be painted to match the surrounding décor. Painting the baffl e: CVS 8 CVS 6 CVS 4 CVS 4 MICRO • Carefully mask off the driver assembly using the paint-mask provided to ensure that the paint does not come into contact with the cone and roll surround System •... - Page 11 Authorized Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfi ller for your country listed under “Support” at tannoy.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support”...