Painting - Tannoy CVS 4 Micro Mode D'emploi

10. Painting

10. Painting
If desired, the grille and baffle panel may be painted to match the surrounding décor.
Painting the baffle:
• Carefully mask off the driver assembly using the paint mask provided to ensure that the paint does not come
into contact with the cone and roll surround.
• Apply several thin coats of paint – this will provide a better finish than one overly thick coat.
Painting the grille:
• Carefully remove the acoustically transparent foam from the reverse side of the grille.
• Paint the grille and then replace the foam - several thin coats of paint will provide a better finish than one overly
thick coat.
• Re-bond the foam to the grille over the entire area using a light spray-adhesive to avoid audible resonances.
13
CVS 4 Micro (EN54) Operation Manual rev 1.1.1