Figure 3.3: Names Dialog Box - Avocent DSR1030 Guide D'installation Et D'utilisation

Assigning target device names
Use the Names dialog box to identify target devices by name rather than by port number. The
Names list is always sorted by port order. You can toggle between displaying the name or the EID
number of each DSRIQ module, so even if you move the target device to another port, the name
and configuration will be recognized by the switch.
NOTE: If a target device is turned off, its respective DSRIQ module will not appear in the Names list.
To access the OSCAR interface Names dialog box:
1. If the OSCAR interface is not open, press
2. Click Setup - Names. The Names dialog box appears.

Figure 3.3: Names Dialog Box

NOTE: If new DSRIQ modules are discovered by the DSR switch, the on-screen list will be automatically
updated. The mouse cursor will change into an hourglass during the update. No mouse or keyboard input will be
accepted until the list update is complete.
Chapter 3: Local Port Operation
. The Main dialog box appears.
Print Screen
19