Target Video Settings; Figure 4.2: Manual Video Adjust Dialog Box - Avocent SwitchView IP 1020 Mode D'emploi

1

Figure 4.2: Manual Video Adjust Dialog Box

Table 4.2: Descriptions for Figure 5.2
Number Description
1 Image Capture Width
2 Pixel Sampling/Fine Adjust
3 Image Capture Horizontal Position
4 Image Capture Vertical Position
5 Contrast
6 Brightness
7 Block Noise Threshold
2. Click the icon corresponding to the feature you wish to adjust.
3. Move the Contrast slider bar and then fine-tune the setting by clicking the Min (-) or Max (+)
buttons to adjust the parameter for each icon pressed. The adjustments display immediately in
the Video Viewer window.
4. When finished, click Close to exit the Manual Video Adjust dialog box.

Target video settings

The Image Capture Width, Pixel Sampling/Fine Adjust, Image Capture Horizontal Position and
Image Capture Vertical Position adjustments affect how the target video is captured and digitized
and are seldom changed.
2 6
3
4 5
7
8
Number Description
8 Pixel Noise Threshold
9 Automatic Video Adjustment
10 Refresh Image
11 Adjustment bar
12 Video Test Pattern
13 Performance Monitor
14 Close button
Chapter 4: The Video Viewer
9
10
11
12
13
14
33