38
DSR Switch Installer/User Guide
2.
Click Commands - Reset PS/2. A message box displays requesting that you confirm the reset.
Click OK.
a.
A message appears indicating that the mouse and keyboard have been reset.
b.
Click X to close the message box.
-or-
Click X or press
and keyboard.
Displaying version information
The OSCAR interface enables you to display the version number of the switch firmware and any
auxiliary devices connected to the switch. This information facilitates system troubleshooting and
support. For optimum performance, keep your firmware current.
To display version information:
1.
If the OSCAR interface is not open, press
2.
Click Commands - Display Versions. The Version dialog box appears. The top half of the box
lists the subsystem versions in the DSR switch.
Figure 3.19: Version Dialog Box
3.
Click DSRIQ to view individual DSRIQ module version information. The DSRIQ Selection
dialog box appears.
to exit without sending a Reset command to the PS/2 mouse
Escape
Print Screen
. The Main dialog box will appear.