Managing Server Tasks Using The Oscar Interface; Figure 3.16: Commands Dialog Box; Table 3.7: Commands To Manage Routine Tasks For Your Target Device(S) - Avocent DSR1030 Guide D'installation Et D'utilisation

Managing Server Tasks Using the OSCAR Interface

From the OSCAR interface Commands dialog box, you can manage your DSR switching system
and user connections, enable the Scan and Broadcast modes and update your firmware.

Table 3.7: Commands to Manage Routine Tasks for Your Target Device(s)

Feature
Broadcast Enable
Scan Enable
User Status
Display Versions
Reset PS/2
To access the OSCAR interface Commands dialog box:
1. Press
Print Screen
2. Click Commands. The Commands dialog box appears.

Figure 3.16: Commands Dialog Box

Purpose
Begin broadcasting to your target devices. Configure a target device list for
broadcasting under the Setup dialog box.
Begin scanning your target devices. Set up a target device list for scanning in the
Setup dialog box.
View and disconnect users.
View version information for the DSR switch as well as view and upgrade firmware
for individual DSRIQ modules.
Re-establish operation of PS/2 keyboard and mouse.
to launch the OSCAR interface. The Main dialog box appears.
Chapter 3: Local Port Operation
35