Electricity Supply; Set-Up And Operation - Bodum C-MILL 10713 Mode D'emploi

ELECTRICITY SUPPLY

This appliance must only be connected to an a/c supply with a voltage of
230 V/50 Hz (Europe version) or 120 V/60 Hz (US or Canada version).
Minimum fuse protection of the socket outlet = 6 amps.

SET-UP AND OPERATION

This BODUM coffee grinder is exclusively intended for grinding coffee
®
beans for domestic use only. Do not use to grind anything else as this
would damage the appliance.
Technical modifications are strictly forbidden due to the inherent
dangers!
FILLING THE APPLIANCE
Please ensure that the mains plug is disconnected from the socket
outlet when you fill the appliance with coffee beans.
The coffee grinder should be used with a maximum of 45 g coffee beans.
(45 g is 2 x the volume of the lid).
DURATION OF OPERATION
In order to prevent the motor from overheating, never use the coffee
grinder for longer than 30 seconds at a time as doing so would increase
the danger of burns due to the motor overheating!
GRINDING THE COFFEE BEANS
– Once the appliance has been filled with coffee beans, put the lid
on so that the tongue on the lid fits into the intended slot in the
housing.
– The coffee grinder is ready for use when the plug is plugged into the
socket.
– Press the on/off button and hold the lid on tight while the coffee is
ground.
– After grinding, unplug the appliance and empty the coffee grinder.
5