Overview Of The Parts - Bodum C-MILL 10713 Mode D'emploi

OVERVIEW OF THE PARTS

1 ON/OFF button (tongue)
2 Lid
3 Housing
4 Metal container
5 Blade arm
6 Cord storage facility
7 Power cord
IMPORTANT INFORMATION
– Young children should be supervised to ensure that they do not play
with the appliance.
– This appliance is not intended for use by persons (including children)
with reduced physical sensory or mental capabilities, or lack experi-
ence and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible
for their safety.
– If the supply cord is damaged, it must be replaced by the manufac-
turer, its service agent or similarly qualified persons in order to avoid
a hazard.
– Switch off the appliance and disconnect from supply before approach-
ing parts that move in use.
UNPACKING
Your coffee grinder is ready for use. Please dispose of the packaging
material with respect for the environment.
CORD STORAGE FACILITY
The coffee grinder has an integrated cord storage facility. To wind or
unwind the power cord, hold the bottom of the housing with one hand
and slowly pull out the base of the housing with the other. The power
cord can then be wound up or out of the cord storage facility. Gently
push the housing base back into its normal position.
4