Operation; Safety Information; Controlling The Bath Lift - Invacare Aquatec Orca Manuel D'utilisation

Bathlift Orca / Orca F / Orca XL
5

Operation

5.1 Safety information

CAUTION

Overloading the bath lift can lead to damage to the device or
prevent lifting.
▸ Do not overload the bath lift and observe the specifications
on the identification label and in Section 10 Technical data
with regard to its load capacity.
!
IMPORTANT
▸ Always perform a visual inspection of the product for
external damage before each use.
▸ Recharge the battery completely before each use.

5.2 Controlling the bath lift

The bath lift can be moved in the following directions:
The bath lift is controlled via the hand control.
With a fully charged battery, the ORCA and ORCA F can per-
i
form 5 bathing operations with a load of 140 kg. The ORCA
XL can perform 4 bathing operations with a load of 170 kg.
10
!
IMPORTANT Risk of damage
▸ The hand control may only be used when the backrest is
properly installed and in the upright position.
!
IMPORTANT
If the battery in the hand control (C) is not sufficiently char-
ged, the red indicator lamp (E) lights up red when the
Down button (D) is pressed. In this case, the lowering func-
tion of the bath lift is disabled. You can however still raise the
lift.
▸ Recharge the battery immediately after raising it.
Raising the bath lift
!
IMPORTANT
If the backrest is lowered, it will move into the upright positi-
on first (not on model ORCA F).
1. Press the Up button (B) on the hand control and keep it pressed.
The backrest moves into the upright position or the seat moves
upwards.
2. Release the Up button on the hand control.
The bath lift stops in the current position.
Lowering the bath lift
!
IMPORTANT
If the seat is already lowered, the backrest lowers towards
the rear (not on model ORCA F).
Operation