earphones are in use, the integrated speakers are automatically
turned off.
CAUTION: Too high volume, especially when using headphones,
can damage your hearing. For this reason, please turn the volume
down before connecting the headphones.
NIGHTLIGHT MODE
Place the DMPJ1 on a side table using the removable stand or on
the door handle using the strap.
To activate the nightlight mode:
1. Press the "On" button then slide the function selector switch on
the "Nightlight"position
stars' arms will light up.
2. Press the "Play/Pause" button to playback in a loop all the
melodies and lullabies downloaded into the "Nightlight" folder of
the micro SD card.
3. The "Play/Pause", "Next", "Previous", "Volume +" and "Volume –"
buttons can be used just as in the "MP3 Player" mode.
Note: in "Nightlight mode", the LCD screen turns itself off and the
playback stops after around 12 minutes. The lights in the arms will
continue to light. To wake the unit up, press any button.
RECORDING MODE
To record a message:
1. Press and hold the "Record" button located at the back of the unit.
2. Speak clearly into the built-in microphone to record your message
or use an external microphone (not included) connected to the
corresponding jack.
3. Release the "Record" button to end the recording and save your
message.
Note: a new recording automatically overwrites the previous saved
message.
To listen to the recorded message:
Press the "Message Playback" button located on the star's mouth to
listen to the message.
To delete the saved message without recording a new one:
1. Connect the unit to your computer using the provided USB cable.
2. After the LightStarMP3 program has started automatically, click the
"Erase Message" button to delete the recorded message.
to enable the night light mode. The
19