Sonos ZonePlayer 120 Guide D'installation page 6

2
Where to Begin
New to Sonos?
It takes just a few steps to get your Sonos Multi-Room Music System up and running (the steps
below are fully explained beginning on page 4) —
1
Connect a ZonePlayer or ZoneBridge (purchased separately) to your broadband
router using an Ethernet cable (supplied). If you purchased a Sonos ZoneBridge,
please refer to the ZoneBridge Setup Guide packaged with your ZoneBridge for
detailed instructions.
2
Place the ZonePlayer(s) in the rooms of your choice.
Install the software and follow the prompts to add the ZonePlayer(s) and set up access
3
to your music files.
4
Add the Controller to your music system.
Unpack your Sonos components, and then follow the setup instructions in sequential order to
ensure that you set up your Sonos Multi-Room Music System correctly. See "Network
requirements" on page 3 to make sure your home network is ready for Sonos, and then turn to
page 4 for installation instructions.
Once you've set up your music system, it's easy to add additional Sonos components any time.
Adding to an existing Sonos system?
If you are adding this ZonePlayer to an existing Sonos system, you can turn directly to page 9.
Sonos ZonePlayer 120 Setup Guide