Appliance Setting; Appliance Switch-On; Dose Dispensing And Setting (Display) - Eureka ATOM 60 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
The fork (15) is designed to support all types of filter holder (from 2,5 to 5 cm).
The ATOM 60 version allows to remove the fork so that, according to the type of
filter holder, the fork height (15) can be modified by inserting it onto its support
on the opposite side.
6.6

APPLIANCE SETTING

Display indicator legend (see Fig. 1)
18
Dispensing visualization of 1 coffee dose
19
Dispensing visualization of 2 coffee dose
20 Counter of dispensed 1 coffee dose
21 Counter of dispensed 2 coffee doses
6.6.1

APPLIANCE SWITCH-ON

When switching the appliance on for the first time, it is configured in the mode
set by the factory and anyway, in the following uses, it will maintain the last
mode previous to switch off.
When switching the appliance on, the following screen is shown for some seconds.
Then the display shows the working screen.
6.6.2

DOSE DISPENSING AND SETTING (DISPLAY)

• Select a dose by pressing (3)
dispense coffee and activate the timer up to zero; the cup (18) on the display fills during
dispensing.
• Once dispensing is completed, the time returns to set value for a new grinding.
• The single dose counter is increased of 1.
• Select the two doses by pressing (5)
(14) to dispense coffee and activate the timer up to zero; the cup (19) on the display fills
during dispensing.
• Once dispensing is completed, the time returns to set value for a new grinding.
• The double dose counter is increased of 1.
• By pressing the increasing key (6)
of the properly selected dose is increased or decreased.
The automatic dispensing can be stopped before the grinding time has elapsed.
During dispensing, press the grinding start key (14) with the filter holder to stop
dispensing:
Press the new grinding start key (14) again to restart dispensing for the
remaining time;
Press the key of the selected dose (flashing) to stop dispensing. The grind-
ing time returns to the value set.
22 Padlock (locked programming)
23 Dispensing time of preset 1 coffee dose
24 Dispensing time of preset 2 coffee dose
, which will light up. Press the grinding start key (14) to
, which will light up. Press the grinding start key
and decreasing one (2)
the dispensing time
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Specialty 65Specialty 75

Table des Matières