Depth Adjustment - Worksite CSW198 Manuel De L'utilisateur

Depth Adjustment

- Before making any adjustment, ensure the power
plug is removed from the socket.
- Loosen the depth adjustment screw using the depth
locking lever (O).
piece and lift the body of the saw until the blade is at
the correct depth.
- The adjusted cutting depth can be verified on the
depth scale (P).
- Tighten the depth locking lever.
Bevel Angle Adjustment
- Before making any adjustment, ensure the power
plug is removed from the socket.
- Loosen the angle locking lever (E).
- Adjust the base plate (L) to the desired angle between
0º and 45º.
- The adjusted cutting angle can be verified on the
angle scale (T).
- Retighten the angle locking lever (E).
Connecting the Dust Pipe
- Insert the dust pipe adapter (R) into the dust outlet (Q).
- Connect the other end of the dust pipe to a suitable vacuum cleaner or dust extractor to prevent
injury.
- Dust hose with 1-1/4" adapter can be attached to a 1-1/4" vacuum hose for dust removal (vacuum sold
separately).
R
Q
NOTE
While using the dust pipe, regularly check that dust or wood chips are not blocking the
dust pipe.
L
E
T
Fig. 7
P
O Fig. 5
L
Fig. 6
21