Technical Data; Intended Use; Electrical Connection And Operation - Festool ETS 150/3 EQ Guide D'utilisation

21 Check for misalignment or binding of
moving parts, breakage of parts, and any
other condition that may affect the tools
operation. If damaged, have the tool
serviced before using. Many accidents are
caused by poorly maintained tools.
22 Use only accessories
recommended by the manufacturer for
your model. Accessories that may be suitable
for one tool, may become hazardous when used
on another tool.
23 Tool service must be performed only by
qualified repair personnel. Service or
maintenance performed by unqualified personnel
could result in a risk of injury.
24 When servicing a tool, use only identical
replacement parts. Follow instructions in
the Maintenance section of this manual. Use
of unauthorised parts or failure to follow
Maintenance instructions may create a risk of
electric shock or injury.

Technical data

Wattage
No load speed
No. of strokes
Sanding stroke
Sanding base, Ø
Weight
Safety level
Symbols
V Volts
A Amperes
Hz Hertz
W Watt
Alternating current
n No load speed
0
Class II Construction
rpm Revolutions per minute
spm Strokes per minute
Ø Diameter

Intended use

The sanders are designed for sanding wood,
plastic, composite materials, paint / varnish,
filling material and similar materials.
Metal and materials with an asbestos content
must not be processed with these tools.
The machines must not be damp nor operated
in a damp environment for electrical safety
reasons. The machines may only be used for
dry sanding.
that
Service
W
rpm
spm
mm (in.)
mm (in.)
kg (lbs)
sanding, sawing, grinding, drilling and other
construction activities contains chemicals
known (to the State of California) to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
are
•lead from lead-based paints,
•crystalline silica from bricks and cement and
other masonry products, and
•arsenic and chromium from chemically-
treated lumber.
The risk from these exposures varies,
depending on how often you do this type of
work.
ETS 150/3 EQ
310
6 000 - 10 500
12 000 - 21 000
3.0 (0.12)
150 (5.9)
1.8 (4.0)
UL 745, CSA C22.2 No. 745
for any damage or accidents resulting from
incorrect use.

Electrical connection and operation

The mains voltage must correspond with the
voltage on the rating plate!
See the following figure for connection and dis-
connection of the power cable.
before connecting or disconnecting the power
cable!
3
Various dust created by power
To reduce your exposure to these
chemicals: work in a well
ventilated area, and work with
approved safety equipment, such
as dust masks that are specially
designed to filter out microscopic
particles.
ETS 150/5 EQ
310
6 000 - 10 500
12 000 - 21 000
5.0 (0.20)
150 (5.9)
1.8 (4.0)
The user bears sole responsibility
Always switch the machine off