Operation; Switching On And Off; Stationary Use; Tips And Tricks - Parkside PMBS 105 A1 Instructions D'utilisation

Initial use / Operation / Maintenance and cleaning / Service centre / Warranty
Wear a dust mask!
Adapter for external extraction
connecting:
Insert the extraction hose
socket (Fig D).
3
Connect an additional dust suction device (e.g.
a workshop suction device) to the extraction
hose . Where appropriate, use the extraction
8
adapter .
7
Removal:
Pull the hose out of the dust extraction unit.
Disconnect the extraction adaptor

Operation

Switching on and off

Switching on:
Push the ON / OFF switch
Switching off:
Push the ON / OFF switch

Stationary use

Turn over the power tool as shown in figure E
and place on a sturdy worktop.
Insert the screw clamp
notch and clamp down the power tool
13
(s. fig. E).

Tips and tricks

Never use the same abrasive belt for wood
and metal.
Worn or torn abrasive belts can damage the work
piece. Therefore, regularly replace the abrasive belts.
Only hang the abrasive belts to store, as folds
etc. render them useless.
into the connection
8
.
7
into position "I".
1
into position "0".
1
into the designated
9

Maintenance and cleaning

Q
Before you carry out any work
on the belt sander always pull the mains plug out
of the mains socket.
The belt sander is designed to be maintenance-free.
C lean the device frequently. This should be done
immediately after you have finished using it.
U se a dry cloth to clean the device - never use
petrol, solvents or cleaners that attack plastic.

Service centre

Q
repaired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
needs to be replaced, always have the
replacement carried out by the manu-
facturer or its service centre. This will
ensure that your device remains safe to use.
Note: Spare parts not listed (e.g. switches) can be
ordered through our call centre.

Warranty

Q
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
Have your device
If the plug or mains lead
GB 41