Cleaning And Caring Of The Casing; Changing The Light Bulb - sauter SHG86 Guide D'installation Et D'utilisation

EN
4 / CARING FOR AND CLEANING YOUR APPLIANCE
the counter hold the light button A pressed down
for about 1" while the corresponding pilot lamp (S)
is on.
• Removing the charcoal filter/s (fig.15)
To take away the charcoal filters, firstly you need
to take away the grease filters (Fig.14). Later,
take away the filters-stop (M) and the charcoal
filters (F) - Fig. 15.
Charcoal filters ref. no.
SHK25AF1 for the models SHG86, SHG88,
SHG89.
SHK57AF1 for the model SHG879.
CLEANING AND CARING OF THE
•
CASING
Avoid products containing abrasives when
cleaning the casing.

CHANGING THE LIGHT BULB

•
Warning
Before carrying out any work, the
power supply to the hood must be turned
off, either by unplugging it or by using the
circuit breaker switch.
Model SHG86
To replace the lamps, take away the grease
filters (Fig. 14); take away the filters support
moving the 2 lateral locks C (Fig. 16). Tighten the
lamps and replace them with the new ones o f the
same type.
Models SHG88, SHG89 and SHG879
To change the halogen bulbs open the cover
levering from the proper slots (Fig.17). Change
with a lamp of the same kind.
29
fig. 15
fig. 16
fig. 17