4 / CARING FOR AND CLEANING YOUR APPLIANCE
CLEANING AND CARING OF THE
•
CASING
Avoid products containing abrasives when
cleaning the casing.
CHANGING THE LIGHT BULB
•
Warning
Before carrying out any work, the
power supply to the hood must be turned
off, either by unplugging it or by using the
circuit breaker switch.
Remove the grease filters by pushing the catch
towards the rear of the hood and turning the
filters outwards (fig. 15).
To replace the incandescence bulbs, remove the
fixture: apply a slight pressure on the 2 stops and
at the same time push the fixture downwards
(fig.17).
Unscrew the bulb and replace with another of the
same type.
29
EN
fig. 17