Cleaning Of The Casing; Changing The Light Bulb - sauter SHC621 Guide D'installation Et D'utilisation

4 / CARING FOR AND CLEANING YOUR APPLIANCE

CLEANING OF THE CASING

•
Avoid products containing abrasives when cleaning the casing.

CHANGING THE LIGHT BULB

•
Warning
Before carrying out any work, the power supply to the hood must be turned off, either
by unplugging it or by using the circuit breaker switch.
Models SHC621 - SHC623 :
- To replace the incandescent lamps remove
the light fitting after unscrewing the setscrew
"A" (Fig. 16).
- Replace with lamps of the same type.
Models SHC634-SHC690-SHC626 :
- To remove the halogen lamps, unscrew the
ring nut by turning it anticlockwise (Fig. 17).
- Replace with lamps of the same type.
- WARNING: Do not touch the new lamp with
bare hands.
28
EN
fig. 16
fig. 17