patura MaxiBox P250 Mode D'emploi page 38

Power output switch
This switch controls the power output settings of the energiser.
Setting
Full Power
Full Power
with battery test
Half Power
Off
Pulse speed switch
The switch controls the output pulse speed and behaviour of the energiser
Setting
Fast
Auto
Fast - nocturnal
Slow - nocturnal
Note: In all switch positions, the energiser will stop functioning before the battery discharges
completely. This helps to prevent battery damage.
Description
The energiser is operating at full output power.
The energiser is operating at full output power but indica-
tor lights show the battery level. See "Battery test setting"
on page 39 for an explanation of the indicator lights.
The energiser is operating at approximately half the
output power of the full power setting.
The energiser is off and is not operating.
Description
The energiser will pulse fast at all times. For detailed
information refer to "Auto setting" next section
The energiser will adjust its pulse speed to conserve
battery power, depending on the battery charge level.
See the table next page.
The energiser will pulse fast at night and slow speed dur-
ing the day (used where stock or predators are nocturnal).
However, if the battery charge level is low, the pulse
speed during the day will change to being very slow.
The energiser will pulse at slow speed at night and fast
speed during the day. However, if the battery charge
level is low, the pulse speed during the night will change
to being very slow.
- 38 -