In The Event Of Problems - Beurer MG 206 HD-enjoy Mode D'emploi

Storage
If you do not use the device for longer periods, we recommend storing it in the original packaging in a dry
place without weighting it down.
Alternatively, you can hang the device in a wardrobe with a coat hanger. To do so, the coat hanger must be
threaded through the hanging loops on the rear side of the device.

9. In the event of problems

Problem
Massage heads rota-
ting at reduced speed.
Massage heads only
rotate in the upper or
lower region.
Massage heads not
moving.
Cause
The load on the massage
heads is too great.
The massage has been
activated for the limited
region.
Appliance not connected to
the power supply.
Device not switched on.
Overheating protection
tripped, device is damaged.
Remedy
Reduce the contact pressure on the head.
Press the A+B/A/B buttons to change or
extend the area.
Connect the plug to the mains supply and
switch on the appliance.
Switch the device on with
Select the massage region.
Contact your authorized dealer or the service
address.
14
.