Table des Matières
Publicité
After assembling, connect the stand to the
floor to prevent from falling over.
■ Stabilizing to the floor
• Use screws (sold separately) to attach and stabilize the
stand.
■ Installation coordinates for screws used to stabilize the stand to the floor
* When stabilizing the stand to the floor, use M6 with a length above 20 mm (25/32 inch).
Units: mm (inch)
■Sample use of the stabilization bolts
1. Attach the stabilization bolts that come with the plasma
display.
2. Stabilize the display by connecting to a wall or standing
beam with a strong cord.
(Repeat the same steps in the laterally direction to stabilize
the assembly to the left and right.)
Use cord and hooks that are available on the market (sold
separately).
2
485(19-3/32)
248(9-3/4)
1
11.5(7/16)
37
Publicité
Table des Matières
