Safety Signs; Product Identification Label - GGP ITALY TR 24 Li Manuel D'utilisation

persons and/or damage things. Examples of
improper use may include, but are not limited to:
– using the machine for sweeping, tilting
the cutting line head. The power of the
motor could throw objects and small
stones 15 metres or more, causing
damage or injury to people;
– trimming hedges or other jobs in which the
cutting means is not used at ground level;
– cutting and chopping trees,
bushes and flowers;
– using the machine for cutting
non-plant material;
– using the machine with the cutting
means above the operator's belt level;
– using the machine in public
gardens, parks, sports centres, on
roadways, fields and woods;
– using cutting means other than those
listed in the "Technical Data" table.
Serious injury and wound hazard.
– using of the machine by more
than one person.
IMPORTANT Improper use of the machine
will invalidate the warranty, relieve the
Manufacturer from all liability, and the user
will consequently be liable for all and any
damage or injury to himself or others.
3.1.3 User types
This machine is intended for use by
consumers, i.e. non-professional operators.
It is intended for "DIY" use

3.2 SAFETY SIGNS

The machine has various symbols on it
(fig. 2). They are used to remind the operator
of the behaviour to follow to use it with
the necessary attention and caution.
Meaning of symbols:
WARNING! DANGER!
Failure to use this machine
correctly can be hazardous
for oneself and others
WARNING! Read the
instruction manual before
using the machine.
only.
IMPORTANT Any damaged or illegible
decals must be replaced. Order replacement
decals from an authorised assistance centre.

3.3 PRODUCT IDENTIFICATION LABEL

The product identification label
provides the following data (fig. 1 ):
1. Sound power level
2. Conformity marking
3. Year of manufacture
4. Type of machine
5. Serial number
6. Name and address of Manufacturer
7. Article code
Write the identification data of the
machine in the specific space on the
label on the back of the cover page.
IMPORTANT Quote the information on
the product identification label whenever you
contact an authorised service workshop.
EN - 7
Anyone operating the machine
under normal conditions for
continuous daily use may
be exposed to a noise level
equal to or exceeding 85
dB (A). Use ear protection
devices and goggles.
PROJECTION HAZARD!
Be careful of flying debris
projected by the cutting
means, that can cause
serious injuries to persons
or damage to things.
PROJECTION HAZARD!
Keep any people or pets
at least 15 m away when
using the machine!
Keep away from bystanders.
Do not leave the
machine in the rain (or
in damp conditions).