Getting To Know The Machine; Description Of The Machine And Planned Use; Intended Use; Improper Use - GGP ITALY TR 24 Li Manuel D'utilisation

or late evening when the noise
could cause disturbance).
• Scrupulously comply with local
regulations for the disposal
of packaging, deteriorated
parts or any elements with
a strong environmental
impact; this waste must not
be disposed of as normal
waste, it must be separated
and taken to specified waste
disposal centres where the
material will be recycled.
• Scrupulously comply with
local regulations for the
disposal of waste materials
• When the machine is
withdrawn from service, do not
dump it in the environment,
but take it to a waste disposal
facility in accordance with the
local regulations in force.
Do not throw electrical
equipment away with
domestic waste. According
to the European Directive
2012/19/EU on electrical and
electronic equipment waste and
its implementation in compliance
with national standards, old
electrical equipment must be
collected separately, for eco-
compatible recycling. If electrical
equipment is disposed of in a
landfill or in the ground, the
harmful substances can reach
the water table and enter the
food chain, damaging your
health and well-being. For further
information on the disposal of
this product, contact your dealer
or a domestic waste collection
service.
At the end of their working
life, dispose of batteries
paying due attention to the
environment. Batteries
contain material classified as
hazardous for you and the
environment. They must be
removed and disposed of
separately at a facility that
accepts lithium-ion batteries.
Separate waste collection
of the products and
packaging used allows the
materials to be recycled
and reused. Reuse of recycled
materials help to prevent
environmental pollution and
reduces the demand for raw
materials.

3. GETTING TO KNOW THE MACHINE

3.1 DESCRIPTION OF THE MACHINE
AND PLANNED USE
This machine is a garden tool and more
precisely a battery-powered portable
grass /grass edge trimmer.
The machine is essentially composed of a
motor which, employing a transmission shaft,
drives a cutting device (cutting line head).
The cutting means works on a surface that
is approximately parallel to the ground
(in case of use as grass trimmer) or
approximately perpendicular to the ground
(in case of use as grass edge trimmer.
The operator can operate the machine and
use the main controls, always keeping a
safe distance from the cutting means.

3.1.1 Intended use

This machine was designed
and manufactured for:
– cutting grass and non woody vegetation
(e.g. around the edges of lawns, flowerbeds,
walls, fences and small grassy areas);
– tidy up the cutting done using a mower;
– being used by one operator.

3.1.2 Improper use

Any other usage not in keeping with the above-
mentioned ones may be hazardous and harm
EN - 6