Maintenance Chart - RedMax HT2200 Mode D'emploi

8. Maintenance
Maintenance, replacement, or repair of the emission control
device and systems may be performed by any non-road engine
repair establishment or individual.

■ MAINTENANCE CHART

System/components
fuel leaks, fuel spillage
fuel tank, air filter, fuel filter
idle adjusting screw
spark plug
cylinder fins, intake air cooling vent
muffler, spark arrester, cylinder exhaust port clean
throttle lever, ignition switch
cutting parts
gear case
screws/nuts/bolts
debris guard
34
Procedure
Before hours
use
✔
wipe out
✔
inspect/clean
see adjusting
✔
idling speed
clean and readjust
plug gap
clean
✔
check operation
replace if
✔
something's wrong
grease
✔
tighten/replace
✔
make sure to attach
Every Every Every
25 50 100
hours hours
after after after
✔
replace, if necessary
replace carburetor
if necessary
GAP : 0.6 ~ 0.7 mm
✔
replace, if necessary
✔
✔
✔
✔
not adjusting screws
English
Note