Safety Instructions; Description Of The Rear Panel - HQ Power VDPLBL8 Notice D'emploi

VDPLBL8 – LED STAGE BLINDER - DMX-CONTROLLED
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the VDPLBL8! Please read the manual thoroughly before bringing this device into service.
If the device was damaged in transit, don't install or use it and contact your dealer.

2. Safety Instructions

• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer
will not accept responsibility for any ensuing defects or problems.
• A qualified technician should install and service this device.
• Make sure that the available voltage does not exceed the voltage stated in the specifications of this manual.
• This device falls under protection class I. It is therefore essential that the device be earthed. Have a qualified
person carry out the electric connection.
• Do not crimp the power cord and protect it against damage. Have an authorised dealer replace it if necessary.
• Disconnect the device from the mains to clean it or when it is not in use. Handle the power cord by the plug only.
• Note that damage caused by user modifications to the device is not covered by the warranty.
• Keep the device away from children and unauthorised users.
• This device is designed for professional use on stage, in discos, theatres, etc. The VDPLBL8 should only be used
indoors with the included power adapter connected to an alternating current of max. 240VAC / 50Hz.
• Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.
• Respect a minimum distance of 0.5m between the device's light output and any illuminated surface.
• Do not expose this device to naked flame sources such as candles.
• Ventilation should not be impeded. Do not cover ventilation openings with items such as blankets.
• Familiarise yourself with the functions of the device before actually using it. Do not allow operation by unqualified
people. Any damage that may occur will most probably be due to unprofessional use of the device.
• Use the original packaging if the device is to be transported.
• All modifications of the device are forbidden for safety reasons.
• Connect the device to the mains with the power plug. Do not connect it to a dimming pack.

3. Description of the Rear Panel

1. Input power cord
2. Fuse
3. Power on/off
4. DMX output
5. DMX input
VDPLBL8 3 VELLEMAN