Declaration Of Conformity - Würth CG 160 Notice D'utilisation Originale

EN
English
1. Technical Data
Blows per minute
Model
1
[min-1]
CG160 10 000
a :Vibrations, k Uncertainty , L
h
Declaration of noise and vibration statement (ISO 15744 and ISO28927-6)
All values are current as of the date of this publication. For the latest information please visit eshop.wurth.fr.
These declared values were obtained by laboratory type testing in accordance with the stated standards and are suitable for comparison with the declared
values of other tools tested in accordance with the same standards. These declared values are not adequate for use in risk assessments and values measured
in individual work places may be higher. The actual exposure values and risk of harm experienced by an individual user are unique and depend upon the way
the user works, the workpiece and the workstation design, as well upon the exposure time and the physical condition of the user. We, WURTH PNEUMATIC
TOOLS , cannot be held liable for the consequences of using the declared values, instead of values reflecting the actual exposure, in an individual risk assess-
ment in a work place situation over which we have no control. This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU
guide to managing hand-arm vibration can be found at www. pneurop.eu/uploads/documents/pdf/PN3-02-NV_Declaration_info_sheet_0111.pdf We recommend
a programme of health surveillance to detect early symptoms which may relate to noise or vibration exposure, so that management procedures can be modified
to help prevent future impairment.
2. Machine type(s)
• This machine is designed for engraving on metal, wood, plastic, glass parts,... or for marking tools and components. No other use permitted. For professional
use only.
• Please read the instructions carefully before starting the machine.
3. Lubrification motor
Use an air line lubricator with SAE #10 oil, adjusted to two drops per minute. If an air line lubricator cannot be used, add air motor oil to the inlet once a day.
Recommended lubricant:
- WÜRTH Art. N° 0893 050 5
4. Maintenance instruction
• Follow local country environmental regulations for safe handling and disposal of all components
• Maintenance and repair work must be carried out by qualified personnel using only original spare parts. Contact the manufacturer or your nearest authorised
dealer for advice on technical service or if you require spare parts.
• Always ensure that the machine is disconnected from energy source to avoid accidental operation.
5. Disposal
• The disposal of this equipment must follow the legislation of the respective country.
• All damaged, badly worn or improperly functioning devices MUST BE TAKEN OUT OF OPERATION.
• Repair only by technical maintenance staff.

6. Declaration of conformity

We : WÜRTH France S.a.
Declare that the product(s): CG160
Machine type(s): Air hammer
Origin of the product: Taiwan
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating : to "Machinery" 2006/42/EC (17/05/2006)
applicable harmonised standard(s) : EN ISO 11148-4 :2012
Name and position of issuer : LEHN Pierre - Directeur Marketing
Place & Date: Erstein, 05/2016
Technical file available from EU headquarter. WÜRTH France S.a. - Marketing Produits - Z.I. Ouest - rue Georges Besse - 67150 ERSTEIN
Original Instructions are in English. Other languages are a translation of the original instructions.
Copyright 2016, Wurth
All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers and drawings.
Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability..
Air consumption
max. pressure
@ load
2 3
[bar] [l/min]
4.1 4
Sound pressure dB(A), K = K
pA pA
Serial Number: From 001 to 999
Weight Dimension Hose Ø
4 5 6
[kg] [mm] [mm]
0.2 160x15 4x6
= 3 dB Uncertainty.
WA
Air hammer
Sound
Soundpower
Air Inlet pressure
L
L
wA
pA
7 8 9
[inch]
[dB(A)] [dB(A)]
1/4' 70.7 81.7
CG160
Vibrations
a k
h
10
[m/s²] [m/s²]
3.8 0.9