Commissioning, Operation - Cleanfix S 20 Mode D'emploi

Commissioning / Operation
S 20 with paper filter bag
The vacuum cleaner S 20 is not suitable for cleaning surfaces, from which any type of dust or substances which
are flammable, poisonous, caustic, irritating are remove that represent a health hazard.
6
3
A
g
C
S 21 with paper filter bag
The vacuum cleaner S 21 is not suitable for cleaning surfaces, from which any type of dust or substances which
are flammable, poisonous, caustic, irritating are remove that represent a health hazard.
6
3
A
g
C
S 20 / S 21 - English
e
8
f
g
A B
6
f
8
D E
e
8
f
g
A B
6
f
8
D E
Changing the paper dustbag
A
The dry vacuum S 20 with a twoply, unbleached
double-layer Papierfilterbeutel (g) as standard. The
double-ply paper filterbag guarantees a constant
high suction. Sucker off (3). Locking handle (6) after
press up and suction
B Filter basket with cotton cloth (f) Take out. Filled
paper bag (g) disposed of. Make that the motor
protection filter (s) is used.
C
Open the new dustbag entirely and place the rubber
ring of the dustbag carefully over the inner part of the
hose connector.
D Filter basket with cotton cloth (f) and clean if neces-
sary. tree cotton cloth or vacuum cleaner for a
thorough cleaning supply and remove the filter
basket with 30 ° with substance. Cotton cloth to dry
and re-insert.
E Place the motor housing (8) back into position and
adjust by pressing the latch (6) back into the
securing position.
Unwind the mains cable (7) completely from the motor
housing. Attached required accessories.
Now you may proceed with vacuum cleaning by pressing
the main switch (3) on.
Changing the paper dustbag
A
The dry vacuum S 21 with a twoply, unbleached
double-layer Papierfilterbeutel (g) as standard. The
double-ply paper filterbag guarantees a constant
high suction. Sucker off (3). Locking handle (6) after
press up and suction
B
Filter basket with cotton cloth (f) Take out. Filled
paper bag (g) disposed of. Make that the motor
protection filter (s) is used.
C
Open the new dustbag entirely and place the rubber
ring of the dustbag carefully over the inner part of the
hose connector.
D
Filter basket with cotton cloth (f) and clean if neces-
sary. tree cotton cloth or vacuum cleaner for a
thorough cleaning supply and remove the filter
basket with 30 ° with substance. Cotton cloth to dry
and re-insert.
E
Place the motor housing (8) back into position and
adjust by pressing the latch (6) back into the
securing position.
Unwind the mains cable (7) completely from the motor
housing. Attached required accessories.
Now you may proceed with vacuum cleaning by pressing
the main switch (3) on.
head (8) decrease.
head (8) decrease.
9