What If There Are Problems - Beurer BR 60 Mode D'emploi

• When using the device on multiple areas that have been stung and bitten,
it is recommended that you clean the heating plate each time. This reduc-
es the possibility of germs and bacteria being transferred from one area of
skin to the next. Use a commercially available alcohol disinfection wipe to
disinfect the heating plate.

9. What if there are problems?

Problem
The device does not
switch on.
The device no longer
gets hot enough.
Device outputs
3 acoustic signals/
the device status LED
(6) flashes – even after
switching the device
OFF and ON again.
Possible cause
The ON/OFF switch
(2) is in the OFF
position.
The batteries are flat. Replace both batteries
The battery level is
too low.
Battery level is too
low, meaning that
the device may no
longer be able to be
operated.
34
Solution
Slide the ON/OFF
switch (2) into the ON
position.
as described in these
instructions for use.
Replace both batteries
as described in these
instructions for use.
Replace both batteries
as described in these
instructions for use.