Publicité
Les langues disponibles
Les langues disponibles
- Clean only the exterior surfaces. Do not dismantle the device to clean it.
- Do not use petrol or any similar light flammable cleaning material.
- After cleaning, the fan must be completely re-assembled.
Storage
- If the fan is not to be used for some time, then store it in a dry room.
- In addition, you could put a cover on your unit to protect it from dust or dirt deposits.
Disposal
- Remove mains plug.
- Cut through the mains cable at the plug.
- Dispose of the unit in a proper manner.
- Under normal conditions, the sound pressure level is below 70 dB(A).
EVT/CasaFan-Ventilatoren, Gelnhäuser Str. 35. D 63505 Langenselbold
Help with faults
Fault
Blade does not turn.
If the fault can not be remedied using the above listed remedies, then the plug has to be
removed from the socket.
A specialist must now establish the cause and carry out the repair work accordingly.
If the mains cable to this unit is damaged, then it can only be repaired by a repair workshop
named by the manufacturer, due a special tool being needed.
Note:
Opening the unit and repairs may only be carried out by a specialist!
Cause
Speed setting to „0".
Mains plug not correctly
inserted.
Household fuse blown/
trip defective.
Fuse has blown due to
overload (motor overhe-
ating).
Remedy
Switch on unit.
Insert mains plug.
Check household fuse/trip.
Remove unit from mains supply. Pull
plug from the socket and have the unit
repaired by a specialist or customer
service.
GB
9
Publicité
