2.11 Transfer In And Out The Bed; 2.12 Transport; 2.13 Cable Placement - Vermeiren Luna Mode D'emploi

2.11 Transfer in and out the bed

L
CAUTION:
In case you can't perform the transfer in a safe manner, ask someone
to assist you.
1. Position you as close as possible to the bed.
2. Check the brakes from the bed are in the on position.
3. Remove or fold down the side railings of the bed.
4. Transfer to/from the bed.

2.12 Transport

L
Risk of injury – See that the bed is attached properly. So you can
WARNING:
avoid injury from the passengers during collision or sudden braking.
L
Risk of injury – Use for attaching the bed and passenger NEVER the
WARNING:
same seatbelt.
L
Risk of injury – Patients may only be transported when recumbent in
WARNING:
the lowest horizontal position.
To avoid damage when transported, the overhead boom should be detached. the power
cable and check that no cables hang near the floor.

2.13 Cable placement

1 = Head slatted frame
2 = Feet slatted frame
3 = Boom sockets
4 = Relief device
5 = Power cable
6 = Transformer / control
7 = Disabling box
8 = Motor of headrest
9 = Knee-bending angle
10 = Motor of head part
11 = Motor of foot part
12 = Manual operation
All cables inside the bed
frame, have been fitted in
such a way that prevents
contact with the floor as
well as squashing or
pinching.
Page 13
Luna
2010-11
box
surface
motor
EN