Strain Relief; Power Cable - Vermeiren Luna Mode D'emploi

N
2.5

Strain relief

L
WARNING:
L
WARNING:
Below the spar of the head slatted frame there is a socket for the tightening of the relief unit.
Insert the relief unit of the power cable (4) into the suspension (3).
Pull the desired length of the power cable (1) in such a way that the power cable (2)
can be laid under the slatted frame without sagging. Be careful to avoid that the cable
(2) come under the traction in any adjustment position.
Fasten the power cable by properly tightening the relief unit of the power cable (4).
Fasten the position of the relief unit by properly tightening the fixing screws (5).
2.6

Power cable

L
WARNING:
L
WARNING:
carefully positioned without kinks, pulling, shearing or other mechanical
damages and without making contact with the floor.
To ensure that your power cable stays properly functional and in a technically secure
condition even after protracted use, and in the case that you do not operate your bed
electrically, we have at the spar of the slatted frame (below the relief unit) provided a device
where you might safely leave the rolled-up cable beneath the nursing bed
Do not remove the relief unit.
Nothing must be fitted to or hung on the relief unit.
1
Nothing but the power cable should be suspended here.
The power cable can be damaged
2
4 5
3
-
The power cable must be
Page 10
Luna
2010-11
= Power cables
1
(power
connection)
2 = Power cables
(connection of
transformer)
3 = Suspension
Ease of pulling
4 = Ease of pulling
Power cables
5 = Fixing screws
Ease of pulling
.
Fig. 8a