Maintenance And Service - Bosch GCO 14-24 J Professional Notice Originale

20 | English
Soft start
The electronic soft start limits the torque when the power
tool is switched on and increases the service life of the mo-
tor.
Practical advice
General advice on using cutting discs
Do not touch the cutting disc after use until it has
u
cooled. The cutting disc becomes very hot during use.
Make sure that the spark guard plate (21) is fitted
u
properly. Flying sparks are created when sanding metals.
Protect the cutting disc against impact, shock and grease.
u
Do not subject the cutting disc to lateral pressure.
Do not load the power tool so heavily that it comes to a
u
stop.
Excessive feed significantly reduces the performance of
the power tool and the service life of the cutting disc.
Only use cutting discs that are suitable for the material
u
being machined.
Permissible workpiece dimensions
Maximum workpiece dimensions:
Workpiece shape
0°
Dia. 129
119 x 119
100 x 196
130 x 130
Minimum workpiece dimensions
(= all workpieces which can still be clamped in place with the
locking spindle (8)): Length 80 mm
Maximum cutting depth (0°/0°): 129 mm
Cutting metal
– Set the required mitre angle as necessary.
– Firmly clamp the workpiece as appropriate for its dimen-
sions.
– Switch on the power tool.
– Slowly guide the tool arm downwards using the handle
(3).
– Cut the workpiece, applying uniform feed.
– Switch off the power tool and wait until the cutting disc
has come to a complete stop.
– Slowly guide the tool arm upwards.
1 609 92A 531 | (16.04.2019)
Transport
– Always carry the power tool by the transport handle (19).
u

Maintenance and Service

Maintenance and Cleaning
u
u
u
u
Mitre angle
The retracting blade guard must always be able to move
45°
freely and retract automatically. It is therefore important to
Dia. 128
keep the area around the retracting blade guard clean at all
times.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
110 x 110
after-sales service centre that is authorised to repair Bosch
power tools.
Accessories
107 x 115
Cutting discs for all metal materials
Cutting disc 355 x 25.4 mm
115 x 115
Cutting disc 355 x 25.4 mm
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
Only use the transport devices to transport the power
tool and never the protective devices.
Pull the plug out of the socket before carrying out any
work on the power tool.
Clean the air vents on your power tool regularly. The
motor's fan will draw the dust inside the housing and ex-
cessive accumulation of powdered metal may cause elec-
trical hazards.
In extreme conditions, always use a dust extractor if
possible. Blow out ventilation slots frequently and in-
stall a residual current device (RCD) upstream. When
machining metals, conductive dust can settle inside the
power tool, which can affect its protective insulation.
Have maintenance and repair work performed exclus-
ively by a qualified specialist. This will ensure that the
safety of the power tool is maintained.
Article number
2 608 600 208
2 608 600 223
Bosch Power Tools