Removing The Side Parts; Pushing And Braking; Anti-Tipping Wheels; Tilt Aid - Drive DeVilbiss Healthcare Multitec Manuel D'utilisation

Removing the side parts

Pushing and braking

Pushing and braking by an attendant:
If the wheelchair is steered by the attendant, the
attendant can use the available drum brake as a driving
and parking brake. This is especially an advantage
for navigating slopes. The attendant operates the
wheelchair by pushing on the provided push handles.
The brakes can be operated a little at a time during
operation by pulling on the brake lever more or less
depending on the need.
The brake lever can now be released, and it remains in
its position.
To release the parking brake, press the brake lever once.
Operating and braking without an attendant:
The person sitting in the wheelchair can operate the
wheelchair himself/herself with the hand rim. He or she
can also stop the wheelchair using the hand rim.

Anti-tipping wheels

Pull the silver-colored disc towards yourself and slide
the tubing along the bracket up or down.
Drive Medical GmbH & Co. KG | As per: 13.03.2018 | Subject to error and change
The side part can be
removed so that it is easier
to get in and out.
Press the locking knob
and pull the armrest
upwards out of its bracket.
To insert the arm rests,
push them into the bracket
until they snap into place.
To park, the brakes are
locked on both sides by
pushing the brake lever.
Then push the locking
lever on the brake down
so that it locks the brake
lever.
The anti-tipping wheels
prevent the wheelchair
from tipping over
backwards. They also
serve to facilitate tilting by
an attendant.
The height of the wheels
can be adjusted.

Tilt aid

Parking brake

The parking brake enables the user to securely park the
wheelchair.
Once the wheelchair is stationary, activate the parking
brake (tire brake). Press the lever forward until it locks
in place by itself.
Now the wheelchair is stable and you can turn or simply
just park.
You release the parking brake by pulling the lever back.

Transport and collapsing

For transport in a personal vehicle or simply to make
space, the backrest can be folded down. It then takes up
very little space and can be easily stored.
In addition, the drive wheels can be easily taken off.
Important!
The wheelchair is not approved as a chair in vehicles
such as a transport vehicle for the disabled!

Collapsing

Remove the seat and back cushions. Simply pull the
cushion off.
Pull the locking pin on the back of the backrest out.
You can now fold the backrest down.
EN
The tilt aids help the
attendant to tilt the
wheelchair more easily
and thus move over
obstacles more easily.
First push the anti-tipping
wheels into the highest
position.
Step on the lever with your
foot and balance with the
push handle.
19
User Manual Multitec