Cleaning The Brewing Unit - Bosch TES 501 Série Notice D'utilisation

en
4. Clean the individual parts with a deter­
gent solution and a soft brush. If neces­
sary, soak in a warm detergent solution.
Clean the air hole (6e) thoroughly.
5. Rinse all parts with clean water and dry.
6. Fit the steam nozzle (6d) and frothing
tube (6c) back into the metal sleeve.
6c
1
7. Twist the steam nozzle clockwise until
the marks are aligned.
8. Attach the milk frother to the steam
valve. Check that the red mark on the
steam valve is covered.
TES501_1DE.indb 33
Risk of scalding
¡
Only use the appliance when the milk froth­
er (6) is completely assembled and i tted.

Cleaning the brewing unit

6e
Clean the brewing unit regularly.
To pre­clean the brewing unit automatically:
Press the service button (12) briel y. The
appliance will rinse if coffee was dispensed
previously. It then switches off.
In addition to the automatic cleaning pro­
gramme, the brewing unit (5a) should be
removed regularly for cleaning (Figure E at
the beginning of the instructions).
1. Press the power on/off switch O / I (9) to
switch off the appliance. All lights go off.
6d
2. Open the door (5b) to the brewing unit.
3. Slide the red lock (5d) on the brewing
2 unit completely to the left.
4. Press the red pushbutton (5c), grasp the
brewing unit by the recessed grips and
withdraw it from the appliance.
5. Rinse the brewing unit (5a) thoroughly
under running water.
33
TES501.. 08/2011
05.08.2011 15:34:51