Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GGM AXA2 - Series access control
Set administer open Lock 2
Press
52
8.7
Users setting for Zone 1
8.7.1
read card to add user
11
read card #
Press
8.7.2
use ID Number and read card to add user
11
ID number #
Press
8.7.3
use card number
11
card number # ... card number # ... #
Press
Note: 1. Card number must be 8 or 10 digits, if the card number is less than 8 or 10 digits,
input 0 before the card number
2. Automatically increases, the user ID will be generated by the machine automatically,
the range is 1 ~ 2000, and automatically search from 1 to 2000
8.7.4
Use ID number and card number to add user
11
ID number #
Press
Note: 1. ID number is 1~4 digits, the range is 1~2000, 1,01,001,0001, all these mean ID number 1.
2. Add card user will generate one "1234 "PIN, this PIN cant open door, only for user modify PIN
8.7.5
Use ID number and PIN to add user
Press
11
ID number #PIN # ... ID number#PIN# ... #
Note: this fi t PIN user, pin is irrelevant with card, the PIN is any 4-6 digits,1st digits
must be 1 for Zone 1 with the exception of 1234 which is reserved.
8.8
Delete user
8.8.1
Read card to delete user
12
read card
Press
8.8.2
Use ID number to delete user
12
ID number #
Press
8.8.3
Use card number to delete user
12
card number #
Press
8.8.4
Delete all users
07
0000
Press
Note: both zone 1 and zone 2 will be deleted.
8.9
Set opening door mode:
8.9.1
Entry is by card only
13
0
Press
8.9.2
Entry is by card and PIN together
13
1
Press
8.9.3
Entry is by card or PIN (factory default)
13
2
Press
read card ... #
read card ... ID number # read card ... #
8-digits card number # ... ID number# 8-digits card number#
read card ... #
ID number # ... #
card number # ... #
#
#
#
#
... #
7
User Manual
EN
Publicité
Table des Matières
