Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GGM AXA2 - Series access control
EN
8.21
Add user for Zone1
Read Manager Add Card, read user cards continuously, read Manager Add card again
8.22
Delete user for Zone 1
Read Manager Delete Card, read user cards continuously,
read Manager Delete card again.
9.
User Operation
9.1
Entry by card mode,Set multi cards to open door when card quantity is 1
Read user card, lock will be unlocked
9.2
Entry by card mode,Set multi cards to open door when card quantity is 2-10
Read these cards one by one, present each card in 5 seconds, lock will be unlocked
9.3
Entry by card and PIN
Present card, then press PIN(4 to 6 digits ), #, lock will be unlocked
9.4
Entry by card or PIN mode
Present card, lock will be unlocked
Or Press PIN(4 to 6 digits ), #, lock will be unlocked
9.5
Relay mode
Relay setting -pulse mode
every time a valid card/tag read or PIN input, the relay will operate,
for the pre-set relay pulse time.
Relay setting-Toggle mode
Every time a valid card/tag read or PIN input, the relay changes state, which will not turn back until
read card/tag or input PIN again
9.6
Modifyuser PIN (no need enter programming mode)
*, read user card, press old PIN, #, new PIN # new PIN #
Or *, press ID number # old PIN# new PIN # new PIN #
Notice: user who dont have user card must get ID number and origin PIN from Admin,
Zone 1 users PIN must start with 1,
Zone 2 users PIN must start with 2.
10.
Alarm function
10.1
Anti-tamper alarm
If the device is disassembled illegally, the buzzer and the external alarm will operate.
10.2
Door contact alarm
When connect with door contact, if the door is opened illegally, the buzzer and the external alarm will
operate.
10.3
The Anti-duress alarm
When read zone 1 anti-duress card/input 8-digit anti duress PIN or zone 2 anti-duress card/input
8-digit anti duress PIN, then press #,
The corresponding lock will open, at the same time, the external alarm witll operate,but the device
buzzer will not operate.
10.4
Remove alarm
Read valid user card, manager card or input master code, then alarm will be removed. If no any ope-
ration, alarm will be removed automatically after 1 min.
10
User Manual
Publicité
Table des Matières
